Current Events in CS & IT

I'll try to update this with events that are relevant for at least a semester or even a year. Some of these will be lists that relate to CS and CSA majors

2019-06-12

Got a little frustrated with the IoC -> Dependency Injection stuff in ASP.NET core while trying to retrieve configuration settings and use them in the ConfigureServices method. Here is what I learned.

It seems quite common in the constructor to save off IConfiguration and IHostingEnvironment instances for later use.

   1 public Startup(IConfiguration configuration, IHostingEnvironment environment)
   2 {
   3     Configuration = configuration;
   4     Environment = environment;
   5 }

Inside of ConfigureServices (which does exactly what it says) we can configure a service related to our configuration and then use it later using dependency injection. But what if I want to use it here? How do I get the value now? That was the question that really bothered me. The prevailing internet opinion is do it using DI or noway. Almost every documentation page or stack overflow discussion centered around injecting it into a controller. There was even some prickly remarks that you shouldn't do it any other ways as that is an anti-pattern.

Point 1: ConfigureServices is to configure services not consume them!

Point 2: I learned the order - Constructor first (no surprise there), ConfigureServices method second and Configure method last.

Point 3: You can use dependency injection on Startup, the constructor, and on the Configure method, but NOT ON ConfigureServices hence the saving off of the two items in the constructor above.

From point #1 above, it becomes a matter of creating a settings object and binding it to a sections in appsettings.json. This can be completely accomplished by the following code in ConfigureServices:

   1 ...
   2 services.Configure<Uris>((settings) =>
   3 {
   4     Configuration.GetSection("UriSettings").Bind(settings);
   5 });
   6 ...

Of course the Uris object was defined as a Plain Old C# Object (POCO) with public properties that match the settings I want to use (yes they will match string, string[], etc.). It implements the IUris interface that will be used to access the service. This will become a little clearer in the next example, so stick with me a moment.

Then using the knowledge gained from Points #2 and #3, I injected IUris service into Configure as follows:

   1 private void InitializeDatabase(IApplicationBuilder app, IUris uris)
   2 {
   3     ...//use uris here somewhere for something
   4 }

Whew, take a deep breath. Because this framework hides so much, what is going on amounts to magic, and as a programmer magic is totally unacceptable!.

2019-05-31

Looking at the C# 8 features. See: The video presentation or see the webpage

Range calculations: Syntax gets shorter. Consider the following license plate number and state, that is then separated into two variables, plate and state.

   1 string x = "BVD789-TN";
   2 string plate = x.Substring(0, x.Length - 2);
   3 string state = x.Substring(x.Length - 2);

can become

   1 string x = "BVD789-TN";
   2 string plate = x[..^3]; //where 0 is assumed
   3 string state = x[^2..]; //where length is assumed
   4 

Property pattern: allows you to use switch more easily. Consider the following

   1 switch(vehicle)
   2 {
   3    case Car c when c.Passenger == 1;
   4       return 2.00m+0.50m;
   5    ...
   6 }

Becomes:

   1 public static decimal CalculateToll(object vehicle)
   2    => vehicle switch
   3    {
   4       Car { Passengers: 0 } => 2.00m+0.50m,
   5       Car { Passengers: 1 } => 2.00m,
   6       Car { Passengers: 2 } => 2.00m-0.50m,
   7       Car _ =>2.00m-1m,
   8 
   9       Taxi { Fares: 0 } => 3.50m + 1.00m,
  10       ...
  11       DeliveryTruck t when t.GrossWeightClass > 5000 => 10.00m + 5.00m,
  12       ...
  13       _ => throw new ArgumentException(message: "Not a known vehicle type", paramName: nameof(vehicle)
  14    };

Or even with nested switch expressions

   1 public static decimal CalculateToll(object vehicle)
   2    => vehicle switch
   3    {
   4       Car c => c.Passengers switch 
   5       { 
   6          0 => 2.00m+0.50m,
   7          1 => 2.00m,
   8          2 => 2.00m-0.50m,
   9          _ => 2.00m-1m, //Note they called the "_" the discard (symbol) which matches any.
  10       },
  11       Taxi { Fares: 0 } => 3.50m + 1.00m,
  12       ...
  13       DeliveryTruck t when t.GrossWeightClass > 5000 => 10.00m + 5.00m,
  14       ...
  15       _ => throw new ArgumentException(message: "Not a known vehicle type", paramName: nameof(...
  16    };

IAsyncEnumerable is a new type. It allows you to produce and consume realtime data. See the video above at abut 35 Minutes.

   1 private static async Task ChartTollsAsync()
   2 {
   3    await foreach (var t in TollSystem.GetVehiclesAsync())
   4    {
   5       await TollSystem.ChargeTollAsync(t.vehicle, t. time, t.inbound, t.license);
   6    }
   7 }

Default implementation in Interfaces. Allow you to have an implementation in an interface. Then you can override the interface and create the implementation, but you don't have to. Interesting.

.Net 4.8 is the last implementation of the .NET framework that will be available. (0:42 in the video). This begs the question what are the different .Net frameworks and what are they for? Where do they belong? Where should I use them?

.NET Framework vs. .NET Core vs. .NET Standard

1. Libraries that target .NET Standard will run on any .NET Standard compliant runtime, such as .NET Core, .NET Framework and Mono/Xamarin (smaller surface area, but wider compatibility)
2. libraries that target .NET Core can only run on the .NET Core runtime.
3. Libraries that target .NET Framework can only run on Windows.

Ignoring libraries for a moment, the reason that .NET Standard exists is for portability; it defines a set of APIs that .NET platforms agree to implement. Any platform that implements a .NET Standard is compatible with libraries that target that .NET Standard. One of those compatible platforms is .NET Core.

To summarize:

1. A .Net Core Class Library is built upon the .Net Standard. If you want to implement a library that is portable to the .Net Framework, .Net Core and Xamarin, choose a .Net Standard Library
2. .Net Core will ultimately implement .Net Standard 2 (as will Xamarin and .Net Framework)
3. .Net Core, Xamarin and .Net Framework can, therefore, be identified as flavours of .Net Standard

To future-proof your applications for code sharing and reuse , you would rather implement .Net Standard libraries (since portable class libraries are now deprecated).

Sources:

• https://stackoverflow.com/questions/42939454/what-is-the-difference-between-net-core-and-net-standard-class-library-project for a nice discussion.

• https://www.davidyardy.com/blog/net-standard-vs-net-core/

• https://devblogs.microsoft.com/dotnet/introducing-net-standard/

2019-02-11

Security: Installed Suricata at home today as part of pfSense. I noticed that (unamed cell company) is using IKEv2 with weak parameters... Hmmm. Turns out it is the Galaxy Note 5 (Android 7.0) that is the instigator of this particular alert. Apparently all email coming from unamed cell company goes through their hosts (even if it is using the outlook app) using outdated VPN connection configurations. The next question would be, is it hackable. Perhaps more later.

2019-02-07

I'm playing with Docker Containers. I didn't have a full concept of what it does, so I started here on youtube. This video covers high level concepts related to efficiency, performance and security.

2018-12-29

I've been playing around with several things this break and I've been able (amid being sick) to catch up on a bunch of stuff.

1. I re-created my website using bootstrap. Don't judge to harshly, I just started playing with it. But at least now it will be visible on my phone.

2. I updated all my infrastructure at home - updated the firewall, got backups running correctly again, updated plex etc.

3. In an effort to create a dashboard that would monitor the various processes and backups etc, I started playing around with nodejs and express. And what did I find? A new tutorial resource that I think I'm going to love! I highly recommend taking a look at the Mozilla Developer Network tutorials at https://developer.mozilla.org/en-US/

2018-01-23

2016-11-30

Why you can't avoid DevOps

2016-11-16

10 Tech Jobs Set For Big Pay Raises In 2017

10 Hot Programming Languages to Build Web Apps

10 Programming Languages That Will Keep You Employed

*These langauges seem to me to be a bit iffy for the list. Cold Fusion, may be around, but I don't see it much. Perl is aptly described in the article as "the chewing gum and baling wire of programming languages." Go seems trendy, but not popular yet.

Nine Data center tools IT Pros Should Know About

1. OpenStack

2. puppet

3. CloudStack OpenStack derivative now computing with OpenStack.

4. System Center - Microsoft

5. OpenNebula aims at simplicity in Data Center Automation.

6. Eucalyptus For use with AWS style services

7. CHEF

8. Ansible Tower is RedHat's cloud management software.

9. git