Differences between revisions 3 and 4
⇤ ← Revision 3 as of 2023-08-24 18:15:21 →
Size: 856
Editor: scot
Comment:
← Revision 4 as of 2024-05-15 18:35:27 → ⇥
Size: 892
Editor: scot
Comment:
Deletions are marked like this. Additions are marked like this.
Line 3: Line 3:
Install Windows Server on one of your remaining VMs. Install Windows Server (Desktop Experience) on one of your remaining VMs.
Line 5: Line 5:
On windows setup your network with the following information: On Windows setup your network with the following information:
Line 11: Line 11:
To do this, run sconfig (if you have a GUI, you are doing it wrong). While you are at it, make sure you've got all of the following configured: To do this, run sconfig (if you have a GUI, you can still do this from PowerShell). While you are at it, make sure you've got all of the following configured:

Installing Windows Server

Install Windows Server (Desktop Experience) on one of your remaining VMs.

On Windows setup your network with the following information:

  • IP address 192.168.1.2
  • Gateway 192.168.1.1
  • DNS 10.10.129.2 and optionally 10.10.129.3 (We will change this soon)

To do this, run sconfig (if you have a GUI, you can still do this from PowerShell). While you are at it, make sure you've got all of the following configured:

  1. [no change]
  2. Set to CPTR230A
  3. [no change]
  4. Enable remote access
  5. [no change]
  6. [no change]
  7. Enable remote desktop
  8. Configure your network settings here.
  9. Set the timezone to Eastern
  10. [no change]
  11. If you haven't done it yet, enter the key and activate your server
  12. [No change ....]

sconfig.png

Start your Windows Server to installing updates.

InstallWindowsServerVm (last edited 2024-05-15 18:35:37 by scot)