Differences between revisions 13 and 33 (spanning 20 versions)

Lab 03-04

Instructions

In this lab you will create some organizational units, groups and users in your AD.

Create a new VM:

Add a new Windows 10 virtual machine
1. Change its network address to be IP=192.168.1.5, subnet=255.255.255.0, DNS=192.168.1.2 and verify that you can access the internet.
2. Change its name to be cpte230w
3. Add the new Windows 10 computer to the top Active directory domain.
  1. Right click start, system, advanced settings
  2. Under Computer Name, click "Change..." and add it to your active directory.
  3. In the Windows 10 computer as administrator add the "Domain Users" to the list of users allowed to use remote desktop
    1. Right click start
    2. Select System, Advanced System Settings
    3. Select Remote, Select Users and Add "Domain Users" to the list.
Find and install the remote administration tools. (Hint: you can do this through powershell easier than through the GUI)

In your domain controller (Using the RSAT tools or powershell):

Create an organizational unit in your child domain named OU_Contractors and add the following items to this OU.
1. Create a global group called g_contractors
2. Create a user called contractor and put them in g_contractors group.
Create a user mgr in the users folder of your parent domain.
1. Make mgr the Administrator for the OU_Contractors by using the delegation wizard. Make sure the the user has "Reset user passwords..." and "Modify the membership of a group"
2. Set the mgr password and document it in the "password" page. Make sure there is no requirement to change the password.
Create a new folder on your cpte230a (parent domain controller) and share it. Make the share name contractors.
1. Set permissions on the share to allow g_contractors to read and write to it.
2. Set permissions on the share to give the mgr user full control.
You will demonstrate mgr's ability by changing the password for "contractor".
1. You can demonstrate this by logging in to your windows 10 machine and starting the active directory users and computers tool.
2. Find the contractor user and reset the password.

Documentation

Document the OU structures added and Groups added to each domain on the domains page. Do this in a new section called "Organizational Units" and "Groups"
Document the Share created and its purpose in a new section called "Shared Resources"

Video Grade Guide

Topics	Points
Video Shows: OU structures and groups created in the instructions	10
Video Shows: A remote login event to windows 10 using the mgr user.	10
Video Shows: the mgr user changing the password for the contractor user on the windows 10 machine.	20
Video Shows: the contractor user accessing the file share and adding a new text file	20
Video Shows: the mgr user accessing the file share and deleting the new text file	20
Video talks through the required documentation.	20

WindowsAdministration/Lab04DelegationAndShares (last edited 2024-10-03 19:39:01 by scot)

-  ⇤ ← Revision 13 as of 2014-10-02 12:26:48 → 
  Size: 1139
  Editor: scot
  Comment:
+   ← Revision 33 as of 2020-08-11 22:38:03 → ⇥
  Size: 3100
  Editor: scot
  Comment:
-Deletions are marked like this.
+Additions are marked like this.
 Line 1:
-= Lab 04 =
+= Lab 03-04 =
== Instructions ==
In this lab you will create some organizational units, groups and users in your AD.
-Line 3:
+Line 5:
-== Instructions ==
+Create a new VM:
-Line 5:
+Line 7:
-In this lab you will create some organizational groups and users in
+. Add a new Windows 10 virtual machine
  a. Change its network address to be IP=192.168.1.5, subnet=255.255.255.0, DNS=192.168.1.2 and verify that you can access the internet.
  a. Change its name to be cpte230w
  a. Add the new Windows 10 computer to the top Active directory domain.
     1. Right click start, system, advanced settings
     1. Under Computer Name, click "Change..." and add it to your active directory.
     1. In the Windows 10 computer as administrator add the "Domain Users" to the list of users allowed to use remote desktop
        1. Right click start
        1. Select System, Advanced System Settings
        1. Select Remote, Select Users and Add "Domain Users" to the list. 
 1. Find and install the remote administration tools. (Hint: you can do this through powershell easier than through the GUI)
-Line 7:
+Line 19:
-In your primary domain:
+In your domain controller (Using the RSAT tools or powershell):
-Line 9:
+Line 21:
-. Create an organizational group named {{{OU_Contractors}}}
    a. Create a global group in the {{{OU_Contractors}}} called {{{g_contractors}}}
    a. Create a user called {{{contractor}}} and put them in {{{g_contractors}}} group.
 1. Create a user mgr in the users folder.
    a. Make mgr the Administrator for the {{{OU_Contractors}}} set his password as {{{Hello123Password!}}} Make sure there is no requirement to change the password.
    a. Make mgr a member of the server operators group and give the account remote desktop access.
    a. I will test mgr's ability by changing the password for "contractor"
+. Create an organizational unit in your child domain named {{{OU_Contractors}}} and add the following items to this OU.
  a. Create a global group called {{{g_contractors}}}
  a. Create a user called {{{contractor}}} and put them in {{{g_contractors}}} group.
 1. Create a user mgr in the users folder of your parent domain.
  a. Make mgr the Administrator for the {{{OU_Contractors}}} by using the delegation wizard. Make sure the the user has "Reset user passwords..." and "Modify the membership of a group"
  a. Set the mgr password and document it in the "password" page. Make sure there is no requirement to change the password.
 1. Create a new folder on your cpte230a (parent domain controller) and share it. Make the share name {{{contractors}}}.
  a. Set permissions on the share to allow {{{g_contractors}}} to read and write to it. 
  a. Set permissions on the share to give the mgr user full control. 
 1. You will demonstrate mgr's ability by changing the password for "contractor".
  a. You can demonstrate this by logging in to your windows 10 machine and starting the active directory users and computers tool. 
  a. Find the contractor user and reset the password.
-Line 17:
+Line 34:
-In your subdomain:
+== Documentation ==
 1. Document the OU structures added and Groups added to each domain on the domains page. Do this in a new section called "Organizational Units" and "Groups"
 1. Document the Share created and its purpose in a new section called "Shared Resources"
-Line 19:
+Line 38:
-. Create a domain local group called {{{dl_temporary}}} in the users folder.
    a. Add {{{g_contractors}}} group to the {{{dl_temporary}}} group.
    
== Documentation ==

 1. Document the OU structures added and Groups added to each domain. 
 2. Do this in a new page called Lab04 and Create new pages called "Organizational Units" and "Groups"
+== Video Grade Guide ==
||'''Topics''' ||'''Points''' ||
||Video Shows: OU structures and groups created in the instructions ||10 ||
||Video Shows: A remote login event to windows 10 using the mgr user. ||10 ||
||Video Shows: the mgr user changing the password for the contractor user on the windows 10 machine. ||20 ||
||Video Shows: the contractor user accessing the file share and adding a new text file || 20 ||
||Video Shows: the mgr user accessing the file share and deleting the new text file || 20 ||
||Video talks through the required documentation. ||20 ||

Diff for "WindowsAdministration/Lab04DelegationAndShares"

Lab 03-04

Instructions

Documentation

Video Grade Guide