Differences between revisions 17 and 18
⇤ ← Revision 17 as of 2017-10-03 21:18:15 →
Size: 1262
Editor: scot
Comment:
← Revision 18 as of 2019-08-11 13:41:51 → ⇥
Size: 1259
Editor: scot
Comment:
Deletions are marked like this. Additions are marked like this.
Line 3: Line 3:
When you installed your initial Windows 2016 server with AD, you also installed a DNS server as part of the installation. In this lab you will install a core server version of Windows 2016. When you installed your initial Windows server with AD, you also installed a DNS server as part of the installation. In this lab you will install a core server version of Windows Server.

Lab 05

When you installed your initial Windows server with AD, you also installed a DNS server as part of the installation. In this lab you will install a core server version of Windows Server.

  1. Configure cpte230a sever to allow zone transfers to cpte230b and vice versa.
  2. Create a secondary Zone on cpte230a for your subdomain
  3. Create a secondary Zone on cpte230b for your root domain
  4. Perform a zone transfers for each secondary zone
  5. Configure DNSSEC on the primary zones of each domain
    1. Make sure both servers are showing the DNSSEC entries.
    2. You may have to perform an additional zone transfer.

Documentation

Include the following information:

  • Updated network diagram and documentation.
  • Document the DNS system as it is at the end of this lab in the networking page.
    • DNS Servers
    • DNS Zones
    • Security features
    • Secondary DNS installation procedures

Video Grade Guide

Topics

Points

Video Shows: DNS configuration as described in the instructions Both primary and secondary zones of each domain

60

Video talks through the documentation required.

40

WindowsAdministration/Lab05SetupSecondaryDns (last edited 2023-10-18 21:06:51 by scot)