Differences between revisions 2 and 18 (spanning 16 versions)
Revision 2 as of 2013-08-16 20:28:56
Size: 1103
Editor: scot
Comment:
Revision 18 as of 2019-08-11 13:41:51
Size: 1259
Editor: scot
Comment:
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
= Lab 04 = ## page was renamed from WindowsAdministration/Lab04SetupSecondaryDns
= Lab 05 =
When you installed your initial Windows server with AD, you also installed a DNS server as part of the installation. In this lab you will install a core server version of Windows Server.
Line 3: Line 5:
When you installed your initial Windows 2012 server with AD, you also installed a DNS server as part of the installation. In this lab you will install a core server version of Windows 2012 datacenter.  1. Configure cpte230a sever to allow zone transfers to cpte230b and vice versa.
 1. Create a secondary Zone on cpte230a for your subdomain
 1. Create a secondary Zone on cpte230b for your root domain
 1. Perform a zone transfers for each secondary zone
 1. Configure DNSSEC on the primary zones of each domain
    1. Make sure both servers are showing the DNSSEC entries.
    1. You may have to perform an additional zone transfer.
Line 5: Line 13:
 1. Install a new Windows 2012 Datacenter core.
 1. Give it an IP address on the same subnet and name it cpte265b
 1. Join it to the domain, but don't make it a Domain Controller
 1. Use server manager on your original domain controller to add the DNS role to the new server
 1. Configure your original sever to allow zone transfers to the new server.
 1. Create a secondary Zone on the server for your original domain
 1. Perform a zone transfer
 1. Configure DNSSEC on the primary zone
== Documentation ==
Include the following information:
Line 14: Line 16:
'''Documentation'''  * Updated network diagram and documentation.
 * Document the DNS system as it is at the end of this lab in the networking page.
  * DNS Servers
  * DNS Zones
  * Security features
  * Secondary DNS installation procedures
Line 16: Line 23:
 * Update the documentation on the "Windows 2012 Installation" page with your new server under a new heading.
 * Update network information on the "Network Docs" page.
 * Create a new page called Network Docs and document the DNS system as it is at the end of this lab.
   * DNS Servers
   * DNS Zones
   * Security features
   * Secondary installation
== Video Grade Guide ==
||'''Topics<<BR>>''' ||'''Points<<BR>>''' ||
||Video Shows: DNS configuration as described in the instructions Both primary and secondary zones of each domain ||60 ||
||Video talks through the documentation required. ||40 ||

Lab 05

When you installed your initial Windows server with AD, you also installed a DNS server as part of the installation. In this lab you will install a core server version of Windows Server.

  1. Configure cpte230a sever to allow zone transfers to cpte230b and vice versa.
  2. Create a secondary Zone on cpte230a for your subdomain
  3. Create a secondary Zone on cpte230b for your root domain
  4. Perform a zone transfers for each secondary zone
  5. Configure DNSSEC on the primary zones of each domain
    1. Make sure both servers are showing the DNSSEC entries.
    2. You may have to perform an additional zone transfer.

Documentation

Include the following information:

  • Updated network diagram and documentation.
  • Document the DNS system as it is at the end of this lab in the networking page.
    • DNS Servers
    • DNS Zones
    • Security features
    • Secondary DNS installation procedures

Video Grade Guide

Topics

Points

Video Shows: DNS configuration as described in the instructions Both primary and secondary zones of each domain

60

Video talks through the documentation required.

40

WindowsAdministration/Lab05SetupSecondaryDns (last edited 2024-09-26 17:14:40 by scot)