Differences between revisions 6 and 7
⇤ ← Revision 6 as of 2014-10-07 13:04:43 →
Size: 1098
Editor: scot
Comment:
← Revision 7 as of 2014-10-08 22:45:17 → ⇥
Size: 1102
Editor: scot
Comment:
Deletions are marked like this. Additions are marked like this.
Line 7: Line 7:
 1. Give it an IP address on the same subnet and name it cpte265c
 1. Join it to the domain, but don't make it a Domain Controller		  1. Give it an IP address of 192.168.1.4 and name it cpte265c
 1. Join it to the primary domain, but don't make it a Domain Controller

Lab 05

When you installed your initial Windows 2012 server with AD, you also installed a DNS server as part of the installation. In this lab you will install a core server version of Windows 2012 datacenter.

  1. Install a new Windows 2012 Datacenter core.
  2. Give it an IP address of 192.168.1.4 and name it cpte265c
  3. Join it to the primary domain, but don't make it a Domain Controller
  4. Use server manager on your original domain controller to add the DNS role to the new server
  5. Configure your original sever to allow zone transfers to the new server.
  6. Create a secondary Zone on the server for your original domain
  7. Perform a zone transfer
  8. Configure DNSSEC on the primary zone

Documentation

Create a new wiki page named "Lab05" Include the following information:

  • Updated network diagram and documentation.
  • Document the DNS system as it is at the end of this lab.
    • DNS Servers
    • DNS Zones
    • Security features
    • Secondary DNS installation procedures

WindowsAdministration/Lab05SetupSecondaryDns (last edited 2023-10-18 21:06:51 by scot)