Lab 05

When you installed your initial Windows server with AD, you also installed a DNS server as part of the installation. In this lab you will install a second Windows 2019 core version of Windows Server.

1. Install a new Windows 2019 server core.
2. Name it cpte230b
3. Enable remote management
4. Enable remote desktop
5. Set the IP address to 192.168.1.3, Gateway=192.168.1.1, DNS=192.168.1.2
6. Set up the time zone
7. Join it to the domain

8. Install the DNS server: Install-WindowsFeature -Name DNS -IncludeAllSubFeature -IncludeManagementTools

9. Configure cpte230a sever to allow zone transfers to cpte230b and vice versa.
10. Create a secondary Zone on cpte230a for your subdomain
11. Create a secondary Zone on cpte230b for your root domain
12. Perform a zone transfers for each secondary zone
13. Configure DNSSEC on the primary zones of each domain
    1. Make sure both servers are showing the DNSSEC entries.
    2. You may have to perform an additional zone transfer.

Documentation

Include the following information:

• Updated network diagram and documentation.
• Document the DNS system as it is at the end of this lab in the networking page.
  • DNS Servers
  • DNS Zones
  • Security features
  • Secondary DNS installation procedures

Video Grade Guide